#How to replace a dishwasher door lock how to#

On some dishwashers, you may need to unscrew the door strike.

Depress the tabs that secure the door strike to the dishwasher frame.

If the alignment is wrong or the door strike is damaged, the dishwasher door will be unable to close. The strike is the part that the door latch hooks into to close the dishwasher door. The dishwasher strike is located at the top of the dishwasher on the dishwasher frame.

#How to replace a dishwasher door lock how to#

If it is easier, you could remove the wiring harness, but make sure you will remember how to reconnect it.

Lay the door down so that you can easily access the door hinges.Use a flat-head screwdriver to remove the metal clip to disconnect the door from the dishwasher.Remove the screws that hold the inner door panel to the outer door panel.Be careful, as the door will be heavy when the tension on the door is removed. Most hinges will be held under tension by a spring and pulley system.Remove the top and side panels using a Torx-head screwdriver to remove the screws that secure the panels.Disconnect the dishwasher from the power source.To access the hinges, on most models the dishwasher frame or top and side panels will need to be removed. If they are not straight or the door is not hanging level on the hinges, they may need to be adjusted or replaced. If the dishwasher door uses a pulley system, it may have become damaged and unable to close the door properly. Over time, the dishwasher door hinges may become bent or loose and stop the dishwasher door from closing correctly. The dishwasher door hinges allow the dishwasher door to open and close. If the door latch or door switch needs to be replaced, be careful not to throw out any components that the new door latch assembly may be missing. Disconnect the wiring harness to remove the door latch assembly from the dishwasher.Some dishwashers may have retaining tabs instead of screws that need to be bent back and the door latch slid out. Unthread the door latch assembly screws.Unthread the screws securing the control panel.

On most dishwashers, a T-15 Torx bit will be needed to unthread the screws.

If required, unthread the screws holding the outer and inner door panels together.

Disconnect the power to the dishwasher.

To access and replace the door latch assembly: Check if the dishwasher is mounted to the cabinet or countertop, and remove the mounting screws if required. Be careful not to pull the dishwasher out too far, as you may break a wire or hose connection. Some dishwashers may require the dishwasher to be pulled out from the countertop or cabinet to gain access to the control panel or door latch assembly. Depending on the model, you may be able to unthread the screws that secure the dishwasher’s control panel to the door, or you may need to unthread all of the screws holding the inner and outer door panels together. On some dishwashers, you will need to remove the control panel to access the door latch. If there is no continuity (a continuous electrical path inside the switch), the door switch will need to be replaced, which will likely solve the dishwasher door issue. Testing the door switch for continuity with a multimeter may solve the issue. With some dishwashers, the dishwasher door may not be closing because of an electrical problem with the door switch. If the door latch is defective or damaged, you will likely need to replace the door latch assembly. Over time, the latch can become worn or bent and not close the door securely. Giving the door latch a clean may solve the issue. The latch can become defective due to soap suds or food dripping down from the kitchen countertop. The door latch is connected to the door switch, which will not allow the dishwasher to start unless the door is properly closed. The dishwasher door latch keeps the door closed and the water inside while the dishwasher is operating.

Is the dishwasher door hitting the cabinet, countertop, or mounting screws? Has a screw come loose that is stopping the door from properly closing?Ī damaged door latch is the most common cause of a dishwasher door not being able to close correctly.

Are there dishes or dish racks protruding out of the dishwasher to stop the door from properly closing?.

When the issue is the dishwasher door, it can be particularly frustrating – why won’t it close? Fortunately, with a little DIY confidence, a Torx-head screwdriver, and this guide, you should be able to get your dishwasher door working again. So much so that when the dishwasher stops working, it can cause a major disruption to our daily routine. Dishwashers have become a must-have appliance in most of our kitchens.